Hello,
I have a little issue configuring my PowerConnect 5448 switch to talk to my Open Manage Essentials server.
I have set up the snmp trap like in "Making my Environment Manageable.pdf"
And using the troubleshooting utily from OME, I'm able to communicate with the switch.
The problem is that one of the fans is out of service and I don't have any information about that in OME.
My question is, do I have to set up something more (MIB's, ..) either in OME or the switch ?
Also, the fan was out of order BEFORE I set up the snmp trap... but I have seen that OME sees events from months of other machines before they were set up ...
The output of show snmp is :
console# show snmp
SNMP is enabled.
Community-String Community-Access View name IP address
-------------------- ------------------ -------------- ------------
dell_ome read only Default OME srv IP
Dell_Network_Manager read write DefaultSuper All
Community-String Group name IP address Type
------------------ ------------ ------------------- ------
Traps are enabled.
Authentication-failure trap is enabled.
Version 1,2 notifications
Target Address Type Community Version Udp Filter To Retries
Port name Sec
---------------- -------- ----------- ---------- ----- ------- ----- ---------
OME srv IP Trap dell_ome 2 162 0 0
Version 3 notifications
Target Address Type Username Security Udp Filter To Retries
Level Port name Sec
[0mMore: <space>, Quit: q, One line: <return>
---------------- -------- ----------- -------- ----- ------- ----- ---------
console#
I don't have anything under SNMP 3 and can't seem to enable it
show system - fan part :
Main Power Supply Status: OK
Fan 1 Status: OK
Fan 2 Status: NOT OPERATIONAL
Fan 3 Status: OK
And OME just shows me everything is "green" about this switch.
I searched Dell and Google over and over but can't seem to find more details so I'm asking here if someone could help me :)
Thanks !
Best regards,
Liliana